Moabits - Global IoT connectivity and SIM management platform logoMoabits
Back to Blog
IoT glossary
eSIM
telecom terms
cellular IoT
device identity

IoT glossary – discover the world of the Internet of Things

MT

Moabits Team

8 min

In the IoT industry, we use lots of acronyms. This IoT glossary has been designed to help you better understand the content of our website, our blog and our portal Orion.

SIM related vocabulary

eID

The eID, or eUICC Identifier, is a unique identifier associated with an embedded Universal Integrated Circuit Card (eUICC). It plays a crucial role in enabling the eUICC to switch between different mobile network operator profiles over-the-air, providing flexibility and adaptability to IoT deployments. Contrary to the ICCID and the MSISDN, the eID does not change when a eUICC is updated over the air. This unique identifier stays.

eSIM

Embedded SIM or MFF2. It is a specific SIM form factor. From a technical standpoint, it operates similarly to a standard SIM card. However, it is vacuum-sealed and can be attached to the circuit board via soldering in the manufacturing process.

We usually mistakenly use the word eSIM to describe eUICC.

eUICC

Embedded Universal Integrated Circuit Card: is a standard that enables a SIM to host different profiles i.e. a SIM can host the profile of two or more different providers. Unlike traditional physical SIM cards, an eUICC allows for the remote provisioning and management of multiple carrier profiles or SIM profiles over-the-air. This flexibility enables IoT devices to, theoretically, seamlessly switch between different mobile network operators without requiring a physical SIM card swap.

In the consumer world, this is often referred to as eSIM and it can be found in most recent smartphones.

ICCID

Integrated Circuit Card Identifier: ICCID is a unique identification number associated with a SIM card, allowing network providers and devices to recognize and manage SIM cards. The ICCID is a 19 or 20 digit long number which can be used to identify a SIM and its provider.

IMSI

International Mobile Subscriber Identity: IMSI is a unique identifier associated with a SIM card, enabling network registration and authentication for mobile devices. Based on the IMSI hosted in the SIM and used by the device to connect on a network, the network provider will be able to identify the user and allow or block the connection.

iSIM

An iSIM, also known as an Integrated SIM, is a SIM card that is directly embedded into a device's hardware. This eliminates the need for a physical, removable SIM card. The iSIM is an embedded Universal Integrated Circuit Card (eUICC) that securely stores and manages subscriber identity information for cellular connectivity. It is programmable and can be remotely provisioned with various carrier profiles, providing flexibility and adaptability for Internet of Things (IoT) devices, connected cars, and other applications that require cellular connectivity. Integrating SIM functionality directly into devices enhances security, reduces physical space requirements, simplifies device design, and streamlines logistics.

MSISDN

Mobile Subscriber Integrated Services Digital Network Number: MSISDN is the telephone number associated with a SIM card, serving as a unique identifier for making and receiving phone calls in general, or sending and receiving SMS in IoT.

SIM

Subscriber Identity Module: A SIM card is a small, removable card inserted into mobile devices to authenticate and connect to a cellular network, providing identity and communication capabilities for IoT devices. SIM cards come in different form factors (size).

Network related vocabulary

CDR

Call Detail Record: CDR is a log that records details of communication activities, including calls, messages, and data usage, often used for billing and network management purposes. Based on the CDR providers can define how much data a device has used during a specific amount of time.

HSDPA / HSPA or 3.5G

High Speed Downlink Packet Access (HSDPA) is an improved 3G mobile communications system that belongs to the High-Speed Packet Access (HSPA) family. It is also referred to as 3.5G and 3G+. HSDPA enables networks based on the Universal Mobile Telecommunications System (UMTS) to achieve better data speeds and capacity. Additionally, it diminishes latency, thereby reducing the round-trip time for applications.

IPsec

Internet Protocol Security (IPsec) is a suite of protocols that secure internet communication by encrypting and authenticating IP packets. It ensures data confidentiality, integrity, and authenticity over IP networks. VPNs commonly use IPsec to create secure and private connections over the internet. It works at the network level and can be set up to safeguard data as it moves through public networks, which makes it a vital tool for boosting the security of online communication.

GPRS or 2.5G

General Packet Radio Service (GPRS), also known as 2.5G, is a way of transmitting data wirelessly on the 2G mobile network. The 2G network was originally designed for calls, so it needed an update to handle data transfer which is where GPRS comes in.

GSM or 2G

Global System for Mobile Communications is a standard for digital cellular communication that is widely used for voice and SMS services on mobile phones. It defines the protocols for second-generation (2G) cellular networks and has played a pivotal role in the development of mobile telecommunications. GSM provides secure and efficient wireless communication, allowing for global roaming and interoperability between different mobile network operators and devices. The protocol as first developed in Europe in 1991. By the mid-2010s, it became a global standard for mobile communications achieving over 90% market share, and operating in over 193 countries and territories.

Location update

A "Location Update" in mobile telecommunications means that a mobile device, like a smartphone or an IoT device with a cellular connection, informs the network of its current location. This information includes the cell or base station that the device is currently using. This is a crucial stage in setting up a data session.

LTE or 4G

Long-term evolution, or LTE (also called 4G) is a wireless communication standard for mobile devices to access the Internet. It improves the capacity and speed of previous standards (2G and 3G). Different countries use varying frequencies and bands for LTE, so only phones that support multiple bands can use LTE in all supported countries.

LTE-M

LTE-M is a fresh mobile technology developed just for the Internet of Things (IoT). The LTE-M mobile radio standard is built on LTE (4G) and focuses on the usage of mobile IoT connectivity. Hence, it is generally used for wirelessly connecting physical objects to the Internet, rather than smartphones, which are more likely to use 4G to benefit from higher speed.

Like Nb-IoT, LTE-M is a low-power, wide-area wireless communication protocol.

LPWAN

A LPWAN (Low-Power, Wide-Area Network) is a wireless communication network. It covers wide areas and consumes low energy. The network enables long-range communication at low data rates between things like sensors that work on batteries.

NB-IoT, LTE-M, and LoRaWAN are LPWAN.

LoRaWAN

LoRaWAN is a wireless communication system that is perfect for smart cities, agriculture, and industrial IoT. It uses low power and is designed for long-distance communication between IoT devices and gateways. It enables devices to send small amounts of data over long distances while conserving battery life. LoRaWAN operates on distinct networks purposely built for LoRaWAN, rather than cellular networks such as NB-IoT or LTE-M.

MQTT

MQTT is an easy, and efficient way of messaging intended for networks that have limited bandwidth. Its purpose is to help IoT devices and applications to exchange data, and issue commands. MQTT utilizes the publish-subscribe model in which IoT devices (publishers) transmit data to a broker, and other devices or applications (subscribers) receive that data. It is frequently utilized in IoT for instantaneous communication, remote surveillance, and managing applications. This enables devices to send data with minimal overhead, ensuring effective and dependable communication in IoT environments with limited resources.

NB-IoT

Narrowband Internet of Things: NB-IoT is a type of wireless technology that uses very little power and covers a wide area. It was made for connecting IoT devices and is part of the LTE standard. It works well over long distances and can transmit small data quickly. This makes it a good choice for many IoT applications, such as smart meters, asset tracking and environmental monitoring.

PDP Context

A Packet Data Protocol Context is a short-term arrangement within a mobile network that controls the communication details for packet-based data links on a mobile device, like accessing the internet. It has info about the device's IP address, data squeezing, security, and Quality of Service (QoS) options to guarantee successful data transfer through the network.

RAT

Radio access types (RAT) are the various technologies and protocols employed to connect and access wireless communication networks, particularly in mobile telecommunications and the Internet of Things (IoT) settings. These technologies determine how devices communicate with the network. They include 2G/GSM, 3G/UMTS, 4G/LTE, 5G and more.

UMTS or 3G

Universal Mobile Telecommunications System: After GSM and 2G, the third standard for mobile communications, UMTS or 3G, was created in 2000. It transmitted data at a much faster rate compared to the 2G standards. The standard is however being shut down by network providers across the world to use the freed bands for newer technology.

VPN

A Virtual Private Network is a tool that makes a safe, coded link over a public network, like the internet. This permits users to reach resources and data as though they were on a private network, improving privacy and security. VPNs are frequently used to keep confidential information secure, remain unknown, and go around geographic limitations by directing traffic through remote servers that shield it from possible eavesdroppers and hackers.

Device related vocabulary

APN

Access Point Name: an APN determines how mobile devices connect to the internet and other services using a cellular network. This name is important because it sets up the necessary communication and routing settings for data, including the authentication method, IP address, and gateway. Each mobile network operator has its own unique APN, and users or devices must set the correct APN to access data services on the network.

Bands

Wireless communication regulatory bodies assign particular radio frequency ranges for cellular communication needs, known as frequency bands. Mobile network operators use these bands to offer various cellular services. Different bands are designated for different generations of cellular technology (2G, 3G, 4G, and 5G) and geographic regions. They decide the wireless network's capacity, coverage, and performance, along with the compatibility of the devices with specific networks. Effective distribution of frequency bands is vital for managing spectrum resources and guaranteeing seamless functioning of cellular networks.

IMEI

International Mobile Equipment Identity: IMEI is a unique 15-digit identifier for mobile devices, used for tracking and authenticating individual IoT devices on cellular networks. Based on the IMEI we can identify the device used.

IP Address

An IP address is a number given to every device on a computer network that uses the Internet Protocol to communicate. They identify a device, like a computer, smartphone, or server, on a network or the internet. This ID is important for data routing and addressing.

There are two main types of IP addresses: IPv4 and IPv6.

IPv4 addresses have four sets of numbers separated by periods while IPv6 addresses use a longer hexadecimal format. IPv4 addresses were the original but have mostly been used up due to internet expansion. IPv6 was introduced to solve the problem of running out of IPv4 addresses. It provides a much larger supply of address space. IPv6 however still has not been widely adopted.

MAC Address

A MAC address is a special code that identifies network connections, like Wi-Fi adapters and network cards, on a local network. MAC addresses are made up of a series of numbers and letters (0-9 and A-F) and are usually shown in six groups separated by colons or hyphens (for example, 00:1A:2B:3C:4D:5E).

Hardware manufacturers assign MAC addresses, which are unique and ensure that devices have different ones. The data link layer of the OSI model uses MAC addresses to send data packets within a local network, which allows devices to communicate and share data.

Connectivity Provider related vocabulary

MCC

Mobile Country Code: is a unique three-digit code used to identify a specific country or geographical area in the context of mobile telecommunications. It's part of the International Mobile Subscriber Identity (IMSI) and is essential for routing calls and data to the correct mobile network within a particular region. MCCs are allocated by the International Telecommunication Union (ITU) and help mobile devices determine which country's network to connect to when roaming or making international calls. The list of MCC can be found here.

MNC

Mobile Network Code: is a numerical code, typically consisting of two or three digits, used in combination with the MCC (Mobile Country Code) to uniquely identify a mobile network operator within a specific country. The combination of MCC and MNC is part of the International Mobile Subscriber Identity (IMSI) and is crucial for routing calls and data to the correct mobile operator's network within a given country. MNCs are assigned and managed by the regulatory authorities in each country to ensure the proper operation and differentiation of mobile networks.

MNO

An Mobile Network Operator, also known as mobile carrier, is a company that provides mobile telecommunications services to consumers and businesses. MNOs own and operate the infrastructure for wireless communication, including cell towers, base stations, and core network components. They are responsible for delivering services such as voice calls, text messaging, and data transmission to mobile device users. Vodafone, Orange, AT&T are MNO for example.

MVNO

An Mobile Virtual Network Operator is a mobile service provider that does not own its wireless network infrastructure but instead leases network access from a Mobile Network Operator (MNO). MVNOs purchase network services from MNOs at wholesale rates and then offer mobile services to their own customers under their brand. MVNOs can differentiate themselves through pricing, service plans, and targeted customer segments. They do not manage the physical network infrastructure but focus on marketing, customer service, and value-added services. MVNOs are a way to increase competition and provide diverse mobile offerings within the telecommunications industry.

PLMN

Public Land Mobile Network: refers to a cellular network that is operated by a mobile network provider and is made available for use by the general public. It encompasses all the technical infrastructure, including cell towers, base stations, and core network components, that enable mobile communication services. PLMNs are responsible for providing mobile services to subscribers within a specific geographic area or country. These networks are the foundation of mobile telecommunications, offering voice, text, and data services to mobile device users. In a roming scenario we distinguish between HPLMN (Home PLMN) and VPLMN (visited PLMN).

VPLMN and HPLMN

VPLMN is a term used in the context of mobile roaming. It refers to a mobile network that is not the subscriber's (connected device) home network but is visited by the subscriber when they are outside their home network's coverage area. When a mobile device roams to a different network, it is said to be in a Visited PLMN (VPLMN). Roaming agreements between network operators allow subscribers to use services in VPLMNs, with billing and service continuity managed between the home network (HPLMN) and the visited network (VPLMN). This concept is crucial for seamless connectivity service when IoT devices are moving from one network to another.

Industry related vocabulary

3GPP

The 3rd Generation Partnership Project (3GPP) is a group of telecommunications organizations that work together to develop standards for mobile communication systems, like 3G, 4G, and 5G. They bring experts from around the world to make rules that help different technologies work together. The 3GPP rules make sure various network operators and devices work together without trouble. This leads to the extensive use of mobile technology and services.

ETSI

The European Telecommunications Standards Institute (ETSI) is a non-profit group that makes telecommunication standards in Europe. It is part of the 3GPP. They write rules for many types of communication technology, including 2G, 3G, 4G, and 5G mobile networks, as well as things like broadcasting, digital signatures, and IoT. ETSI ensures that telecommunications are compatible and standardized, which supports the growth of the global ICT industry.

GSMA

The GSM Association is an industry organization representing the interests of mobile network operators and related companies worldwide. It plays a key role in standardizing mobile communication technologies and promoting their global adoption. The GSMA hosts events, develops industry standards, and advocates for the mobile industry's interests, including issues like spectrum allocation, regulatory policies, and mobile network security.

ITU

The International Telecommunication Union (ITU) is a branch of the United Nations that focuses on managing worldwide telecommunications and information technology. Their goals include distributing and regulating the worldwide radio spectrum and satellite paths, producing communication network standards, and promoting the growth of overall communication infrastructure. The ITU helps countries work together and ensures that telecommunication things like phones and the internet work well globally.

Related articles

About Moabits

Founded in Spain in 2020, Moabits simplifies global IoT connectivity for companies that build, deploy, or resell connected solutions.

Through global SIM and eSIM coverage, smart automation, and our powerful platform Orion, we make managing connected devices seamless, so you can focus on scaling your business.

From service providers and MVNOs to OEMs and IoT solution developers, Moabits delivers the flexibility, visibility, and control needed to launch, manage, and grow smarter connectivity ecosystems worldwide.

Our Purpose

Our Mission

Moabits empowers businesses to successfully deliver high quality connectivity services by providing a complete suite of solutions.

Moabits mission to provide reliable global IoT connectivity solutions

Our Vision

To provide technology to help connect the world, fostering global collaboration, enhancing efficiency, and improving the quality of life for all.

Moabits vision for seamless worldwide IoT connectivity platform

Let us look at your connectivity together

Whether you are scaling a fleet, deploying meters or launching a new IoT product, our team helps you choose the right coverage, plan and platform setup. Talk directly to the engineers and account managers who will run your project.

Get in touch